Dimension Engineering
Motor Drivers
SyRen 10
SyRen 25
SyRen 50
Sabertooth 2X5
Sabertooth 2X5 R/C
Sabertooth 2X12
Sabertooth 2X12 R/C
Sabertooth 2X25
Sabertooth 2X32
Sabertooth 2X60
Radio Control
BattleSwitch
CellShield
DoubleSwitch
LipoShield
PicoSwitch
Servo Pigtails
SportBEC
R/C Lighting
DELight Starter Kit
DELight Controller
DELink
DELight Single LEDs
DELight Strip LEDs
EasyLights
Sinewinder Lights
DC to DC
3.3V Switching Regulator
5.0V Switching Regulator
1A Adjustable Switching Regulator
3A Adjustable Switching Regulator
HV Adjustable Switching Regulator
AnyVolt 3
AnyVolt Micro
LVBoost
Negatron
Breakout Boards
Sensors
Buffered 2g Accelerometer
Buffered 6g Accelerometer
Buffered 3D Accelerometer
Motion Control
Kangaroo x2
About
The Company
Warranty Information
Terms of Usage
Our Dealers
Shipping FAQ
Accelerometer Guide
Switching Regulator Guide
BEC FAQ
Resources
DEScribe PC Software
Arduino Libraries
Calculators
Legacy Products
Legacy Products
Buffered 3D Accelerometer
Price: 35.00
Weight: 1.3g
International Shipping: 3.00
Find a local dealer

What is an accelerometer?
This product is currently out of stock. For an accelerometer with the same featureset, please see the DE-ACCM3D.

Product Description

The DE-ACCM3D2 is the most advanced analog accelerometer solution to date, featuring a triple axis ±2g accelerometer chip. It also has integrated op amp buffers for direct connection to a microcontroller's analog inputs, or for driving heavier loads.

The ACCM3D2 has an onboard 3.3V LDO regulator, allowing you to power the board with 3.5V to 15V sources. You can also use this regulator to power an external microcontroller with up to 50mA. For operation as low as 2.4V, you can bypass the voltage regulator and choose your own operating voltage.

It is designed to fit in the DIP-16 form factor, making the DE-ACCM3D suitable for breadboarding, perfboarding, and insertion into standard chip sockets. To keep things as simple as possible, there are only 5 pins - two for power, and three for the X, Y and Z analog outputs.

Additional circuitry ensures that the product won't be damaged by reversed power connections.

Don't need a Z axis? Try the 6g ACCM or the 2g ACCM.

Product Specs

Model: DE-ACCM3D2
Performance: Tri axis ±2g sensing
666mV/g sensitivity at 3.3V
500Hz bandwidth
Accurately drives up to a 500Ω load
3.5V to 15V input using onboard regulator
2.0V to 3.6V input bypassing the regulator
Draws only 0.9mA!
Protective Features: Reverse voltage protection
Output short protection
Applications: Motion, tilt and slope measurement
Shock sensing
Position sensing
Datasheet: DE-ACCM3D2.doc (458kb)
DE-ACCM3D2.pdf (485kb)
LIS344ALH.pdf (310kb)
Example Projects: Hacking an alarm clock so you can punch it to make it shut up

Making a G meter for your car

David T.'s motor balancing experiments

Emergency signal generator

Making a simple vibration meter

Society of Robots' tilt to servo control app

3D accelerometer