Dimension Engineering
Motor Drivers
SyRen 10
SyRen 25
SyRen 50
Sabertooth 2X5
Sabertooth 2X5 R/C
Sabertooth 2X12
Sabertooth 2X12 R/C
Sabertooth 2X25
Sabertooth 2X32
Sabertooth 2X60
Radio Control
BattleSwitch
CellShield
DoubleSwitch
LipoShield
PicoSwitch
Servo Pigtails
SportBEC
R/C Lighting
DELight Starter Kit
DELight Controller
DELink
DELight Single LEDs
DELight Strip LEDs
EasyLights
Sinewinder Lights
DC to DC
3.3V Switching Regulator
5.0V Switching Regulator
1A Adjustable Switching Regulator
3A Adjustable Switching Regulator
HV Adjustable Switching Regulator
AnyVolt 3
AnyVolt Micro
LVBoost
Negatron
Breakout Boards
Sensors
Buffered 2g Accelerometer
Buffered 6g Accelerometer
Buffered 3D Accelerometer
Motion Control
Kangaroo x2
About
The Company
Warranty Information
Terms of Usage
Our Dealers
Shipping FAQ
Accelerometer Guide
Switching Regulator Guide
BEC FAQ
Resources
DEScribe PC Software
Arduino Libraries
Calculators
Legacy Products
Legacy Products
25W Step down adjustable switching regulator
Price: 25.00
Weight: 10g
International Shipping: 3.00
Find a local dealer

What is a switching regulator?
DE-SWADJ3

Lead Time
~8 weeks

Product Description

The DE-SWADJ 3 is a larger version of our DE-SWADJ adjustable step down voltage regulator. Previously it was necessary to put multiple DE-SWADJ units in parallel to achieve ratings over 1A, which was bulky, expensive and carried with it a considerable increase in dropout voltage. The DE-SWADJ 3 is designed to be stronger, faster and better. It can process 3A of current, typical ripple is 25mV and under ideal circumstances the regulator can be up to 96% efficient.

It continues the ease-of-use of the DE-SWADJ, making it simple to add an adjustable voltage source to a new or existing project with all the efficiency benefits of switch-mode power. The DE-SWADJ 3 is pin-compatible with the common 78XX family of linear voltage regulators, and has a small screw on top that allows you change the output voltage as your project evolves. It has integrated decoupling capacitors, so external capacitors are not generally necessary.

DE-SWADJ3 can deliver a maximum of 25 Watts.

The screw potentiometer on DE-SWADJ is worm-gear driven, so small vibrations and movement will not cause the voltage to shift. Use of glue to hold the screw in place is strongly discouraged and could damage the device.

Never soldered before? You might like our breakout boards.

Product Specs

Model: DE-SWADJ3
Performance: Adjustable from 3 to 13V output using screw
3A output at 3 to 8V
(Please see datasheet for current ratings at higher voltages)
>90% efficiency
1.2V typical dropout voltage, 2.0v maximum at full load
Applications: Battery powered applications
Robots
Battery charging
Electronics prototyping
Powering multiple servos at their max rated voltage
Datasheet: DE-SWADJ3.doc (381kb)
DE-SWADJ3.pdf (403kb)
DE-SWADJ3