SyRen 10A regenerative motor driver
The SyRen motor driver is one of the most versatile, efficient
and easy to use motor drivers on the market. It is suitable for
medium powered robots - up to 30lbs in combat or 100lbs for
general purpose robotics.
Out of the box, the SyRen 10 can supply a single DC brushed
motor with up to 10A continuously. Peak currents of 15A
are achievable for a few seconds.
Overcurrent and thermal protection means you'll never have to
worry about killing the driver with accidental stalls or by
hooking up too big a motor.
With just one SyRen driver you can control a motor with:
analog voltage, radio control, serial and packetized serial.
You can build many different robots of increasing complexity
for years to come with a SyRen. Owning two SyRens allows you
to build differential drive (tank style) robots because they
can work in tandem with built in mixing.
The operating mode is set with the onboard DIP switches so there are no
jumpers to lose. The SyRen features screw terminal connectors - making
it possible for you to build a robot without even soldering.
SyRen is the first synchronous regenerative motor driver in its class.
The regenerative topology means that your batteries get recharged
whenever you command your robot to slow down or reverse. SyRen also
allows you to make very fast stops and reverses - giving your robot a
quick and nimble edge.
SyRen has a built in 5V BEC that can provide power to a microcontroller
or R/C receiver. The lithium cutoff mode allows SyRen to operate safely
with lithium ion and lithium polymer battery packs - the highest energy
density batteries available.
SyRen's transistors are switched at ultrasonic speeds (32kHz), meaning
no one will be able to hear your robot ninja army approaching.
Use of our motor drivers with cheap AC adapters is not recommended.
Use a battery or at least put a battery in parallel with a DC supply.
Servo pigtails are available here.
Up to 18V in: 10A continuous, 15A peak
24V in: 8A continuous, 10A continuous with additional heatsinking/airflow, 15A peak
Synchronous regenerative drive
Ultra-sonic switching frequency
Thermal and overcurrent protection
Lithium protection mode
Input modes: Analog, R/C, simplified serial, packetized serial
Size: 1.4” x 2.25” x .55”
35 x 57 x 14 mm
Combat robots up to 30lb
Normal and hobby robots up to 100lb
Differential drive robots
Electric vehicles, ride-on toys, scooters
Easy speed/direction control for pumps, conveyors, automation and any
application that uses a brushed DC motor
Quick start guide.doc
Quick start guide.pdf
SyRen DIP switch wizard
Motor driver efficiency comparison
Sample RPM versus throttle graph
Using a SyRen with an ATX (or similar) DC power supply
Controlling a SyRen with a BASIC Stamp II
Libraries for Arduino
Simple Serial Mode test using PICBASIC
Simple Serial Mode controlled with a pot using PICBASIC
Show us yours!